Thermal Ribbon for the Datamax A-4212, A-4310, A-4408 & A-4606 Printers

Our Thermal Wax Ribbons versus the Competitors:

• Ribbon Width: You thermal ribbons should be wider than your label and label carrier.
• A wider ribbon will protect the printhead. If the label or label carrier (substrate) comes in contact with the printhead, you will see a diminished life of the printhead.
• Ribbon width should be 1/4 to 1/2 inch wider than the label or label carrier.
• If you go to wide on the ribbon, you run the risk of causing the ribbon to wrinkle. Our recommendation is for the thermal ribbon to be no greater than 1/2 inch larger than your label carrier. (Backing of the label).
• High Sensitivity Ink - We use a very fine grind on all of our ribbons. Our pigment formulation allows us to provide a thinner coat of ink on the ribbon.
• This thinner coat requires less heat to melt the wax than our competitors.
• A thin ribbon coat reduces the buildup of ink on the printhead. Many of our competitors ribbons will accumulate excess ink on the printhead. The more ink that exists will cause smearing of barcodes which can results in misprints and charge backs.
• Our high sensitivity inks can print at 10 inches per second, while most of our competitors are printing at speeds of 8 inches per second or less.
• Our thin coating, high sensitivity ink will extend the life of your printhead, reduce your energy cost and shorten your printing time .
• Our extra fine grind on our ink produces a much finer printed image while reducing smearing.
• We enhance our wax ribbon with resin.
• Our wax melts and fills in the peaks and valleys of the media to produce a sharper print than many of our competitors.
• Our wax ribbons can bond to paper, coated paper and flood coated stocks.
• The resin in our wax ribbon will harden to stand up to greater abrasion and greater scratch resistance than our non-resin enhanced competitors.
• Printer ribbons naturally attract static when they unwind. We use a proprietary anti-static ribbon coating to reduce static.
• Our high sensitivity inks and ant-static technology are part of our Print head Saver features that extend the life of your printhead.
• Our Ribbons ISO 9001, ISEGA, Reach and RoHS certified.
• Our thermal ribbons are packaged in box that is crush resistant to 5,000 pounds. The box is tape less, glue less and fully recyclable.
• Our ribbon coating is done with a hot melt technology. Most other manufacturer ribbons are made using solvents and halogen. Other ribbons will expose your employees and customers to solvents, halogens and noxious gases. Most other manufacturer ribbons cannot come into direct contact with food ours can. Go Ganson - Go Green.